RaspAP — Simple wireless router setup for Debian-based devices

Quick installer

Alternatively, begin with a clean install of the latest release of a supported Linux distribution. In the example below, Raspberry Pi OS (64-bit) Lite is used. Update your OS to its latest version, including the kernel and firmware, followed by a reboot:.

 sudo apt-get update
 sudo apt-get full-upgrade
 sudo reboot
              

Set the WiFi country in raspi-config‘s Localisation Options:

   sudo raspi-config
                

Invoke RaspAP’s Quick Installer:

   curl -sL https://install.raspap.com | bash
                

Initial settings

After completing either of these setup options, the wireless AP network will be configured as follows:

• IP address: 10.3.141.1
• Username: admin
• Password: secret
• DHCP range: 10.3.141.50 — 10.3.141.254
• SSID: RaspAP
• Password: ChangeMe

It is strongly recommended that you change these default credentials in RaspAP’s Authentication and Hotspot > Security panels.

Your AP’s basic settings and many advanced options may now be modified by RaspAP.